Our Clients
- Load per castor250kg per castor *
- Wheel diameter100mm
- Overall height137mm
- WheelPolyurethane on Nylon
- Secure checkout
- 14-day returns on unused items
- UK-based castor advice
Specifications
- Castor Type
- Braked Swivel Top Plate Castor
- Housing
- Stainless Steel
- Wheel Diameter
- 100mm
- Wheel Material
- Polyurethane on Nylon
- Wheel Colour
- Blue
- Tread Width
- 40mm
- Tread Hardness
- 87 Shore A
- Bearing Type
- Ball
- Load Capacity
- 250kg per castor *
- Brake
- Locks Wheel and Swivel
- Top Plate Size
- 105 x 85mm
- Bolt Hole Centres
- 80 x 60mm
- Bolt Hole Diameter
- 8mm
- Swivel Radius
- 140mm
- Total Castor Height
- 137mm
- Temperature Range
- -30°C to +80°C
Will it fit?
- Bolt hole80 x 60mm
- Overall height137mm
- Swivel radius140mm
Replacing an old castor? Measure between the centres of two fixing holes along the long edge, then across the short edge, and compare with the hole centres above. Allow the swivel radius as clear space around each castor so it can turn freely.
Load check
How we work it out: on a real floor one castor is often carrying little or nothing, so we share the weight across one fewer castor than you fit (with 3 castors, across all 3). Tick the box to add a 30% margin for rough use.
Floors & use
Polyurethane tread · working temperature -30°C to +80°C
- Rolls quietly and smoothly
- Kind to most finished floors
- Hard-wearing, carries a high load for its size
- Ideal on concrete, epoxy, vinyl and tiles
- Not intended for very hot areas
- Less cushioning than rubber over rough ground
Details & FAQs
Stainless Steel Braked Castor
This heavy-duty 100mm stainless steel braked swivel castor runs on a blue polyurethane on nylon wheel, carrying up to 250kg per castor. It is built for industrial trolleys, food processing, commercial kitchens and laboratory equipment where corrosion resistance and smooth rolling matter.
The integrated brake locks both the wheel and the swivel for secure positioning. The 87 Shore A tread gives wear resistance and shock absorption, and the ball bearing hub keeps movement quiet and low-friction. The 105 x 85mm top plate has four 8mm holes. It works from -30°C to +80°C.
Why Choose This Castor
- ✓ Brake locks both the wheel and the swivel
- ✓ Stainless steel bracket for wet and hygienic areas
- ✓ Non-marking polyurethane tread on a nylon centre
- ✓ Ball bearing hub for smooth rolling under load
- ✓ 250kg load capacity per castor
- ✓ Wide 40mm tread
* Load capacity is per castor. For a set of four, allow for uneven floors by planning on three castors carrying the load.
Where It Works Best
- ✓ Industrial trolleys and transport carts
- ✓ Food processing and commercial kitchens
- ✓ Pharmaceutical and laboratory equipment
- ✓ Warehousing, logistics and manufacturing
- ✓ Stainless steel workstations, racks and fabrication setups
Need a different size? See our stainless steel braked castor range.
Frequently Asked Questions
What does the brake lock?
The integrated brake locks both the wheel and the swivel, so the castor cannot roll or turn while it is applied.
What is the wheel made of?
The wheel has a blue 87 Shore A polyurethane tread on a nylon centre, which gives wear resistance and shock absorption.
How much weight can it carry?
Each castor is rated at 250kg. A set of four is best used for loads up to around 750kg, allowing for uneven floors.
How is it fitted?
The 105 x 85mm top plate has four 8mm holes on 80 x 60mm centres. Bolt it flat to the underside of your trolley or equipment.
How much room does it need?
The total castor height is 137mm and the swivel radius is 140mm, so allow that clearance when it turns.
What temperatures can it be used in?
The castor is suited to temperatures from -30°C to +80°C.
Delivery & returns
Trusted by businesses including
