Our Clients
- Load per castor250kg per castor *
- Wheel diameter100mm
- Overall height137mm
- WheelPolyurethane on Nylon
- Secure checkout
- 14-day returns on unused items
- UK-based castor advice
Specifications
- Castor Type
- Swivel Top Plate Castor
- Housing
- Stainless Steel
- Wheel Diameter
- 100mm
- Wheel Material
- Polyurethane on Nylon
- Wheel Colour
- Blue
- Tread Width
- 40mm
- Bearing Type
- Ball
- Load Capacity
- 250kg per castor *
- Top Plate Size
- 135 x 110mm
- Bolt Hole Centres
- 105 x 80mm
- Bolt Hole Diameter
- 10mm
- Swivel Radius
- 92mm
- Total Castor Height
- 137mm
- Temperature Range
- -30°C to +80°C
Will it fit?
- Bolt hole105 x 80mm
- Overall height137mm
- Swivel radius92mm
Replacing an old castor? Measure between the centres of two fixing holes along the long edge, then across the short edge, and compare with the hole centres above. Allow the swivel radius as clear space around each castor so it can turn freely.
Load check
How we work it out: on a real floor one castor is often carrying little or nothing, so we share the weight across one fewer castor than you fit (with 3 castors, across all 3). Tick the box to add a 30% margin for rough use.
Floors & use
Polyurethane tread · working temperature -30°C to +80°C
- Rolls quietly and smoothly
- Kind to most finished floors
- Hard-wearing, carries a high load for its size
- Ideal on concrete, epoxy, vinyl and tiles
- Not intended for very hot areas
- Less cushioning than rubber over rough ground
Details & FAQs
Stainless Steel Swivel Castor
This heavy-duty 100mm stainless steel swivel castor runs on a blue polyurethane on nylon wheel, carrying up to 250kg per castor. It is made for food processing and hygienic areas where corrosion resistance, easy cleaning and reliable load performance matter.
The polyurethane tread offers wear resistance, low rolling resistance and floor protection, and it stays quiet and smooth in use. Precision ball bearings keep rolling low-effort under load, and the 135 x 110mm top plate has four 10mm holes. It works from -30°C to +80°C.
Why Choose This Castor
- ✓ Stainless steel construction for wash-down and hygienic areas
- ✓ Blue polyurethane tread that is wear-resistant and floor-friendly
- ✓ Ball bearing for smooth, low-effort rolling under load
- ✓ 250kg load capacity per castor
- ✓ Wide 40mm tread for stability and load distribution
- ✓ -30°C to +80°C for chilled, ambient and warm areas
* Load capacity is per castor. For a set of four, allow for uneven floors by planning on three castors carrying the load.
Where It Works Best
- ✓ Food processing and food handling areas
- ✓ Meat, dairy and beverage production facilities
- ✓ Pharmaceutical and clean-room equipment
- ✓ Stainless steel trolleys, racks and mobile machinery
Need a different size? See our stainless steel swivel castor range.
Frequently Asked Questions
What is the wheel made of?
The wheel has a blue polyurethane tread bonded to a nylon centre, which gives wear resistance and floor protection.
What type of bearing does it use?
It uses precision ball bearings, which give efficient, low-friction rolling even under continuous load.
How much weight can it carry?
Each castor is rated at 250kg. A set of four is best used for loads up to around 750kg, allowing for uneven floors.
How is it fitted?
The 135 x 110mm top plate has four 10mm holes on 105 x 80mm centres. Bolt it flat to the underside of your trolley or equipment.
How much room does it need?
The total castor height is 137mm and the swivel radius is 92mm, so allow that clearance when it turns.
What temperatures can it be used in?
The castor is suited to temperatures from -30°C to +80°C, which covers chilled, ambient and warm environments.
Delivery & returns
Trusted by businesses including
