Our Clients
- Load per castor160kg per castor *
- Wheel diameter100mm
- Overall height128mm
- WheelRubber on Polypropylene
- Secure checkout
- 14-day returns on unused items
- UK-based castor advice
Specifications
- Castor Type
- Fixed Top Plate Castor
- Bracket
- Stainless Steel
- Wheel Diameter
- 100mm
- Wheel Material
- Rubber on Polypropylene
- Wheel Colour
- Blue
- Non-Marking
- Yes
- Tread Width
- 29mm
- Tread Hardness
- A70
- Bearing Type
- Roller
- Load Capacity
- 160kg per castor *
- Top Plate Size
- 101 x 85mm
- Bolt Hole Centres
- 80 x 60mm
- Bolt Hole Diameter
- 8mm
- Total Castor Height
- 128mm
- Temperature Range
- -20°C to +80°C
Will it fit?
- Bolt hole80 x 60mm
- Overall height128mm
Replacing an old castor? Measure between the centres of two fixing holes along the long edge, then across the short edge, and compare with the hole centres above. Allow the swivel radius as clear space around each castor so it can turn freely.
Load check
How we work it out: on a real floor one castor is often carrying little or nothing, so we share the weight across one fewer castor than you fit (with 3 castors, across all 3). Tick the box to add a 30% margin for rough use.
Floors & use
Rubber tread · working temperature -20°C to +80°C
- Cushions the load and soaks up vibration
- Quiet on most surfaces
- Copes with uneven floors, thresholds and outdoor use
- Good grip on smooth floors
- Takes more effort to push than nylon under heavy loads
- Oils and solvents shorten tyre life
Details & FAQs
Stainless Steel Fixed Castor
This 100mm stainless steel fixed castor runs on a blue non-marking rubber wheel, carrying up to 160kg per castor. It is made for material handling trolleys, hospital equipment, retail display units and laboratory equipment where floors must stay clean and unmarked.
The rubber tread is mounted on a polypropylene centre for a strong yet lightweight wheel. The rigid stainless bracket keeps equipment tracking in a straight line, the A70 tread balances grip and wear, a roller bearing keeps rotation smooth, and the 101 x 85mm top plate with four 8mm holes bolts securely to flat surfaces. It works from -20°C to +80°C. Pair it with matching swivel castors for steering.
Why Choose This Castor
- ✓ Stainless steel housing for washdown and hygienic areas
- ✓ Blue non-marking rubber wheel that protects indoor floors
- ✓ Fixed (rigid) design for straight, controlled travel
- ✓ A70 tread for good grip and quiet running
- ✓ Roller bearing for smooth rotation
- ✓ 160kg load capacity per castor
* Load capacity is per castor. For a set of four, allow for uneven floors by planning on three castors carrying the load.
Where It Works Best
- ✓ Material handling trolleys in warehouses and workshops
- ✓ Hospital equipment where non-marking wheels are required
- ✓ Retail display units that are repositioned often
- ✓ Laboratory equipment where cleanliness matters
Frequently Asked Questions
Does this castor swivel?
No. This is a fixed (rigid) castor that only rolls forwards and backwards. Pair it with matching swivel castors so your trolley can steer.
Will the wheel mark my floors?
No. The blue rubber tread is non-marking, so it suits hospital, retail and laboratory floors.
How much weight can it carry?
Each castor is rated at 160kg. A set of four is best used for loads up to around 480kg, allowing for uneven floors.
How is it fitted?
The 101 x 85mm top plate has four 8mm holes on 80 x 60mm centres. Bolt it flat to the underside of your trolley or equipment.
How tall is the castor?
The total castor height is 128mm.
Delivery & returns
Trusted by businesses including
