Our Clients
- Load per castor150kg per castor *
- Wheel diameter80mm
- Overall height108mm
- WheelPolyurethane on Nylon
- Secure checkout
- 14-day returns on unused items
- UK-based castor advice
Specifications
- Castor Type
- Braked Swivel Top Plate Castor
- Housing
- Stainless Steel
- Wheel Diameter
- 80mm
- Wheel Material
- Polyurethane on Nylon
- Wheel Colour
- Grey
- Tread Width
- 27mm
- Tread Hardness
- D60
- Bearing Type
- Roller
- Load Capacity
- 150kg per castor *
- Brake
- Locks Wheel and Swivel Head
- Top Plate Size
- 105 x 85mm
- Bolt Hole Centres
- 80 x 60mm
- Bolt Hole Diameter
- 8mm
- Swivel Radius
- 120mm
- Total Castor Height
- 108mm
- Temperature Range
- -40°C to +80°C
Will it fit?
- Bolt hole80 x 60mm
- Overall height108mm
- Swivel radius120mm
Replacing an old castor? Measure between the centres of two fixing holes along the long edge, then across the short edge, and compare with the hole centres above. Allow the swivel radius as clear space around each castor so it can turn freely.
Load check
How we work it out: on a real floor one castor is often carrying little or nothing, so we share the weight across one fewer castor than you fit (with 3 castors, across all 3). Tick the box to add a 30% margin for rough use.
Floors & use
Polyurethane tread · working temperature -40°C to +80°C
- Rolls quietly and smoothly
- Kind to most finished floors
- Hard-wearing, carries a high load for its size
- Ideal on concrete, epoxy, vinyl and tiles
- Not intended for very hot areas
- Less cushioning than rubber over rough ground
Details & FAQs
Stainless Steel Braked Castor
This 80mm stainless steel braked swivel castor runs on a grey polyurethane on nylon wheel, carrying up to 150kg per castor. It is made for food manufacturing equipment, industrial trolleys and laboratory equipment where hygiene and corrosion resistance matter.
The brake acts on both the wheel and the swivel head for secure positioning. The roller bearing reduces friction, and the 105 x 85mm top plate with four 8mm holes gives a stable mounting. It works from -40°C to +80°C.
Why Choose This Castor
- ✓ Brake acts on both the wheel and the swivel head
- ✓ Stainless steel for hygiene and corrosion resistance
- ✓ D60 polyurethane tread on a nylon core
- ✓ Roller bearing for efficient movement
- ✓ 150kg load capacity per castor
- ✓ 105 x 85mm top plate with four 8mm holes
* Load capacity is per castor. For a set of four, allow for uneven floors by planning on three castors carrying the load.
Where It Works Best
- ✓ Food manufacturing equipment that needs hygienic, corrosion-resistant components
- ✓ Industrial trolleys that need smooth, controlled movement
- ✓ Laboratory equipment where precise positioning is necessary
Need a different size? See our stainless steel braked castor range.
Frequently Asked Questions
What does the brake lock?
The brake acts on both the wheel and the swivel head, so the castor cannot roll or turn while it is applied.
What is the wheel made of?
The wheel has a grey D60 polyurethane tread on a nylon core, which offers a balance of hardness and smooth operation.
How much weight can it carry?
Each castor is rated at 150kg. A set of four is best used for loads up to around 450kg, allowing for uneven floors.
How is it fitted?
The 105 x 85mm top plate has four 8mm holes on 80 x 60mm centres. Bolt it flat to the underside of your trolley or equipment.
How much room does it need?
The total castor height is 108mm and the swivel radius is 120mm, so allow that clearance when it turns.
What temperatures can it be used in?
The castor is suited to temperatures from -40°C to +80°C.
Delivery & returns
Trusted by businesses including
