Our Clients
- Load per castor150kg per castor *
- Wheel diameter80mm
- Overall height108mm
- WheelNylon
- Secure checkout
- 14-day returns on unused items
- UK-based castor advice
Specifications
- Castor Type
- Braked Swivel Bolt Hole Castor
- Housing
- Stainless Steel
- Wheel Diameter
- 80mm
- Wheel Material
- Nylon
- Wheel Colour
- White
- Tread Width
- 34mm
- Hardness of Tread
- D75
- Bearing Type
- Plain Bearing
- Load Capacity
- 150kg per castor *
- Fixing
- Single Bolt Hole
- Bolt Hole Size
- 12mm
- Swivel Radius
- 120mm
- Total Castor Height
- 108mm
- Temperature Range
- -40°C to +80°C
Will it fit?
- Bolt hole12mm
- Overall height108mm
- Swivel radius120mm
Replacing an old castor? Measure between the centres of two fixing holes along the long edge, then across the short edge, and compare with the hole centres above. Allow the swivel radius as clear space around each castor so it can turn freely.
Load check
How we work it out: on a real floor one castor is often carrying little or nothing, so we share the weight across one fewer castor than you fit (with 3 castors, across all 3). Tick the box to add a 30% margin for rough use.
Floors & use
Nylon / polypropylene wheel · working temperature -40°C to +80°C
- Very easy to push, even when loaded
- Resists water, oil and many chemicals
- Hard-wearing and easy to wipe clean
- Best on smooth concrete and hard floors
- Noisier than rubber or polyurethane
- Hard tread can mark or damage soft and delicate floors
- Rolls poorly over debris and cables
Details & FAQs
Stainless Steel Bolt Hole Castor
This 80mm stainless steel braked swivel castor runs on a white nylon wheel and carries up to 150kg per castor. It suits food manufacturing equipment, processing trolleys and industrial carts, where hygiene and reliable load handling matter.
The D75 nylon wheel gives a firm surface for smooth floors, and the brake holds the equipment in position when it is parked. A single 12mm bolt hole fits into the end of a tube leg or onto a threaded fixing, and the castor works from -40°C to +80°C.
Why Choose This Castor
- ✓ Foot brake to hold equipment in position
- ✓ Stainless steel housing for washdown and hygienic areas
- ✓ White nylon wheel with a 34mm tread
- ✓ 150kg load capacity per castor
- ✓ Works from -40°C to +80°C
- ✓ Single 12mm bolt hole for tube legs and threaded fixings
* Load capacity is per castor. For a set of four, allow for uneven floors by planning on three castors carrying the load.
Where It Works Best
- ✓ Food manufacturing equipment in hygienic areas
- ✓ Processing trolleys on smooth hard floors
- ✓ Industrial carts that need reliable load handling
Tube Adaptors Also Available
Fitting this castor to a round or square tube leg? Matching tube adaptors are also available. Choose the size that fits the inside of your tube and buy it together with your castors.
Frequently Asked Questions
How much weight can it carry?
Each castor is rated at 150kg. A set of four is best used for loads up to around 450kg, allowing for uneven floors.
How is it fitted?
It has a single 12mm bolt hole. Fit it with a matching 12mm bolt or threaded stem, or use a matching tube adaptor to fit it into a round or square tube leg.
What is the wheel made of?
The wheel is white nylon with a D75 hardness and a 34mm tread width. It suits smooth hard floors.
What temperatures can it work in?
The castor works from -40°C to +80°C.
How tall is the castor?
The total castor height is 108mm and the swivel radius is 120mm.
Delivery & returns
Trusted by businesses including
