Our Clients
- Load per castor1000kg per castor
- Wheel diameter200mm
- Overall height226.5mm + 76mm
- WheelPolyurethane on cast iron
- Secure checkout
- 14-day returns on unused items
- UK-based castor advice
Specifications
- Castor Type
- Extra Heavy Duty Swivel Jacking Castor
- Wheel Diameter
- 200mm
- Wheel Material
- Polyurethane on cast iron
- Wheel Colour
- Maroon
- Tread Width
- 50mm
- Bearing Type
- Roller
- Load Capacity
- 1000kg per castor
- Jacking Lift
- 76mm
- Operating Method
- Spanner
- Fixing
- 4 bolt hole mounting plate
- Plate Size
- 152 x 106mm
- Plate Hole Centres
- 114 x 64mm
- Plate Hole Diameter
- 13mm
- Bolt Hole Size
- 12mm
- Total Castor Height
- 226.5mm + 76mm
- Total Height to Plate Lower Bolt Hole
- 265mm
- Jacking Unit Height From Plate Lower Bolt Hole
- 240mm
- Jacking Unit Height When Extended
- 620mm
- Swivel Radius
- 165mm
Will it fit?
- Fixing holeØ 13mm
- Bolt hole12mm
- Overall height226.5mm + 76mm
- Swivel radius165mm
Replacing an old castor? Measure between the centres of two fixing holes along the long edge, then across the short edge, and compare with the hole centres above. Allow the swivel radius as clear space around each castor so it can turn freely.
Load check
How we work it out: on a real floor one castor is often carrying little or nothing, so we share the weight across one fewer castor than you fit (with 3 castors, across all 3). Tick the box to add a 30% margin for rough use.
Floors & use
Polyurethane tread
- Rolls quietly and smoothly
- Kind to most finished floors
- Hard-wearing, carries a high load for its size
- Ideal on concrete, epoxy, vinyl and tiles
- Not intended for very hot areas
- Less cushioning than rubber over rough ground
Details & FAQs
Extra Heavy Duty Jacking Castors
Built for the heaviest jobs in the workshop and factory, this extra heavy duty swivel jacking castor carries up to 1000kg per castor. A large 200mm maroon polyurethane wheel on a cast iron centre rolls smoothly on its roller bearing, while the built-in jacking unit gives 76mm of lift. Turn the jack with a spanner to lower the wheel and raise your machinery, trolley or equipment base for moving, then wind it back up so it stands firm and level on its own feet.
The castor fixes securely to your equipment with a 152 x 106mm mounting plate with four 13mm holes on 114 x 64mm centres. The jacking unit measures 240mm from the plate lower bolt hole and reaches 620mm when fully extended. Check the plate size, hole centres and jacking height against your equipment before ordering.
Why Choose This Castor
- ✓ 1000kg load capacity per castor for extra heavy duty equipment.
- ✓ 76mm jacking lift raises and lowers heavy equipment so it can roll or stand firm.
- ✓ Spanner operation controlled height adjustment for machinery.
- ✓ Maroon polyurethane on cast iron wheel 200mm wheel with a 50mm tread for smooth rolling under heavy loads.
- ✓ Swivel castor 165mm swivel radius for steering heavy loads into position.
- ✓ Roller bearing for smooth rotation.
* Load capacity is per castor on a level surface. Check that the plate size, hole centres and jacking height suit your equipment before fitting.
Where It Works Best
This extra heavy duty swivel jacking castor suits:
- ✓ Heavy machinery: manoeuvring large industrial equipment.
- ✓ Warehouse trolleys: transporting heavy loads.
- ✓ Manufacturing equipment: machinery that needs adjustable height.
Frequently Asked Questions
How does the jacking castor work?
Turn the jack with a spanner to wind the wheel down by up to 76mm and lift your equipment onto its castors. Wind it back up to lower the equipment onto its own feet so it stays firmly in place.
How much weight can this castor carry?
Each castor is rated for 1000kg. Add up the castors fitted to your equipment to work out the total load.
How is the castor fitted?
It has a 152 x 106mm mounting plate with four 13mm holes on 114 x 64mm centres, bolted to your equipment frame.
What is the wheel made of?
A 200mm maroon polyurethane tyre on a cast iron centre with a 50mm tread, running on a roller bearing.
Does this castor swivel?
Yes. It has a 165mm swivel radius, so you can steer heavy equipment into position once it is lifted onto the castors.
How high does the jacking unit go?
The jacking unit measures 240mm from the plate lower bolt hole and reaches 620mm when fully extended.
Delivery & returns
Trusted by businesses including
