Our Clients
- Load per castor500kg per castor *
- Wheel diameter160mm
- Overall height207mm
- WheelPolyurethane on Nylon
- Secure checkout
- 14-day returns on unused items
- UK-based castor advice
Specifications
- Castor Type
- Braked Swivel Top Plate Castor
- Housing
- Stainless Steel
- Wheel Diameter
- 160mm
- Wheel Material
- Polyurethane on Nylon
- Wheel Colour
- Blue
- Tread Width
- 50mm
- Tread Hardness
- 87 Shore A
- Bearing Type
- Ball Bearing
- Load Capacity
- 500kg per castor *
- Brake
- Locks Wheel and Swivel
- Top Plate Size
- 135 x 110mm
- Bolt Hole Centres
- 105 x 80mm
- Bolt Hole Diameter
- 12mm
- Swivel Radius
- 170mm
- Total Castor Height
- 207mm
- Temperature Range
- -30°C to +80°C
Will it fit?
- Bolt hole105 x 80mm
- Overall height207mm
- Swivel radius170mm
Replacing an old castor? Measure between the centres of two fixing holes along the long edge, then across the short edge, and compare with the hole centres above. Allow the swivel radius as clear space around each castor so it can turn freely.
Load check
How we work it out: on a real floor one castor is often carrying little or nothing, so we share the weight across one fewer castor than you fit (with 3 castors, across all 3). Tick the box to add a 30% margin for rough use.
Floors & use
Polyurethane tread · working temperature -30°C to +80°C
- Rolls quietly and smoothly
- Kind to most finished floors
- Hard-wearing, carries a high load for its size
- Ideal on concrete, epoxy, vinyl and tiles
- Not intended for very hot areas
- Less cushioning than rubber over rough ground
Details & FAQs
Stainless Steel Braked Castor
This heavy-duty 160mm stainless steel braked swivel castor runs on a blue polyurethane on nylon wheel, carrying up to 500kg per castor. It is built for food processing, pharmaceutical, medical, marine and commercial environments where corrosion resistance and smooth rolling matter.
The integrated top plate brake locks both the wheel and the swivel for secure positioning. The non-marking tread gives floor protection and low rolling resistance, and the ball bearing hub keeps movement smooth under load. The 135 x 110mm top plate has four 12mm holes, and the castor works from -30°C to +80°C.
Why Choose This Castor
- ✓ Brake locks both the wheel and the swivel
- ✓ Corrosion-resistant stainless steel bracket for wash-down areas
- ✓ Strong, quiet, non-marking polyurethane tread on a nylon centre
- ✓ 500kg load capacity per castor
- ✓ Ball bearing hub for smooth, low-friction rolling
- ✓ Wide 50mm tread for stability under heavy loads
* Load capacity is per castor. For a set of four, allow for uneven floors by planning on three castors carrying the load.
Where It Works Best
- ✓ Heavy machinery bases and fabrication equipment
- ✓ Warehouse and logistics trolleys
- ✓ Food-processing and commercial kitchen equipment
- ✓ Stainless steel workstations and mobile platforms
- ✓ Pharmaceutical, medical and clean-room environments
- ✓ Outdoor, wet or corrosive environments that need stainless components
Frequently Asked Questions
What does the brake lock?
The integrated top plate brake locks both the wheel and the swivel, so the castor stays securely in position while it is applied.
What is the wheel made of?
A blue polyurethane tread on a nylon centre, with an 87 Shore A hardness and a ball bearing hub. The tread is strong, quiet and non-marking.
How much weight can it carry?
Each castor is rated at 500kg. A set of four is best used for loads up to around 1500kg, allowing for uneven floors.
How is it fitted?
The 135 x 110mm top plate has four 12mm holes on 105 x 80mm centres. Bolt it flat to the underside of your trolley or equipment.
How much room does it need?
The total castor height is 207mm and it needs 170mm of clearance to swivel freely. It works from -30°C to +80°C.
Delivery & returns
Trusted by businesses including
