Our Clients
- Load per castor1000kg per castor
- Wheel diameter150mm (twin)
- Overall height209mm
- WheelPolyurethane on Cast Iron
- Secure checkout
- 14-day returns on unused items
- UK-based castor advice
Specifications
- Castor Type
- Twin Wheel Swivel Gantry Castor
- Wheel Diameter
- 150mm (twin)
- Wheel Material
- Polyurethane on Cast Iron
- Wheel Colour
- Orange
- Tread Width
- 40mm per wheel
- Bearing Type
- Ball Bearing
- Load Capacity
- 1000kg per castor
- Top Plate Size
- 200 x 160mm
- Bolt Hole Centres
- 160 x 120mm
- Bolt Hole Diameter
- 14mm
- Overall Height
- 209mm
- Housing
- Fabricated Welded Steel
Will it fit?
- Bolt hole160 x 120mm
- Overall height209mm
Replacing an old castor? Measure between the centres of two fixing holes along the long edge, then across the short edge, and compare with the hole centres above. Allow the swivel radius as clear space around each castor so it can turn freely.
Load check
How we work it out: on a real floor one castor is often carrying little or nothing, so we share the weight across one fewer castor than you fit (with 3 castors, across all 3). Tick the box to add a 30% margin for rough use.
Floors & use
Polyurethane tread
- Rolls quietly and smoothly
- Kind to most finished floors
- Hard-wearing, carries a high load for its size
- Ideal on concrete, epoxy, vinyl and tiles
- Not intended for very hot areas
- Less cushioning than rubber over rough ground
Details & FAQs
Heavy Duty Twin Wheel Gantry Castor
This 150mm twin wheel swivel gantry castor carries up to 1000kg per castor on two orange polyurethane on cast iron wheels side by side. A heavy fabricated, welded steel housing and ball bearing swivel head make it built for mobile gantries, heavy machine bases and industrial trolleys.
The twin wheels spread the load and turn more easily under heavy weight than a single wheel, while the polyurethane treads roll quietly and protect floors. A large 200 x 160mm top plate with four 14mm holes bolts flat under the frame, and the overall height is 209mm.
Why Choose This Castor
- ✓ 1000kg load capacity per castor
- ✓ Twin wheels for easier steering and better load spread
- ✓ Polyurethane on cast iron wheels: tough, quiet and floor friendly
- ✓ Heavy fabricated, welded steel housing
- ✓ Ball bearing swivel head with grease point
- ✓ Large 200 x 160mm top plate with 14mm holes
Load capacity is per castor. For a set of four, allow for uneven floors by planning on three castors carrying the load.
Where It Works Best
Mobile gantry cranes, heavy machine bases, die and mould trolleys, transformer and engine stands, fabrication trolleys and heavy industrial platforms moved by hand or tow. Best on smooth hard floors such as sealed concrete and epoxy.
Frequently Asked Questions
How much weight can this castor carry?
Each castor is rated at 1000kg. A set of four is best used for loads up to around 3000kg, allowing for uneven floors.
Why choose twin wheels?
Two wheels share the load, spread it over a wider footprint and turn more easily under heavy weight than a single wide wheel.
What size bolts do I need?
The 200 x 160mm top plate has four 14mm holes on 160 x 120mm centres, so M12 bolts with nuts and washers are the right fit.
Will it mark my floor?
The orange polyurethane treads are non-marking on most smooth floors and much quieter than steel or nylon wheels.
How tall is the castor once fitted?
The overall height from floor to top plate is 209mm.
Delivery & returns
Trusted by businesses including
