Our Clients
- Load per castor150kg per castor *
- Wheel diameter100mm
- Overall height128mm
- WheelPolyurethane on Nylon
- Secure checkout
- 14-day returns on unused items
- UK-based castor advice
Specifications
- Castor Type
- Swivel Bolt Hole Castor
- Housing
- Stainless Steel
- Wheel Diameter
- 100mm
- Wheel Material
- Polyurethane on Nylon
- Wheel Colour
- Red
- Tread Width
- 30mm
- Hardness of Tread
- D60
- Bearing Type
- Roller Bearing
- Load Capacity
- 150kg per castor *
- Fixing
- Single Bolt Hole
- Bolt Hole Size
- 12mm
- Swivel Radius
- 91mm
- Total Castor Height
- 128mm
- Temperature Range
- -40°C to +80°C
Will it fit?
- Bolt hole12mm
- Overall height128mm
- Swivel radius91mm
Replacing an old castor? Measure between the centres of two fixing holes along the long edge, then across the short edge, and compare with the hole centres above. Allow the swivel radius as clear space around each castor so it can turn freely.
Load check
How we work it out: on a real floor one castor is often carrying little or nothing, so we share the weight across one fewer castor than you fit (with 3 castors, across all 3). Tick the box to add a 30% margin for rough use.
Floors & use
Polyurethane tread · working temperature -40°C to +80°C
- Rolls quietly and smoothly
- Kind to most finished floors
- Hard-wearing, carries a high load for its size
- Ideal on concrete, epoxy, vinyl and tiles
- Not intended for very hot areas
- Less cushioning than rubber over rough ground
Details & FAQs
Stainless Steel Swivel Bolt Hole Castor
This 100mm stainless steel swivel castor runs on a red polyurethane on nylon wheel and carries up to 150kg per castor. It suits environments where hygiene and cleanliness are paramount, such as food manufacturing, as well as industrial trolleys, hospital carts and laboratory equipment.
The D60 tread gives a balance between firmness and flexibility on smooth surfaces, and a roller bearing in the wheel hub gives smooth rotation with reduced friction. It works from -40°C to +80°C, and a single 12mm bolt hole fits into the end of a tube leg or onto a threaded fixing.
Why Choose This Castor
- ✓ Stainless steel housing for hygienic environments
- ✓ Red polyurethane tread on a nylon centre
- ✓ D60 tread for smooth surfaces
- ✓ Roller bearing for smooth rotation and reduced friction
- ✓ Works from -40°C to +80°C
- ✓ 150kg load capacity per castor
- ✓ Single 12mm bolt hole for tube legs and threaded fixings
* Load capacity is per castor. For a set of four, allow for uneven floors by planning on three castors carrying the load.
Where It Works Best
- ✓ Food manufacturing equipment where hygiene and cleanliness are essential
- ✓ Industrial trolleys for smooth transport of goods
- ✓ Hospital carts that need reliable mobility
- ✓ Laboratory equipment in controlled environments
Tube Adaptors Also Available
Fitting this castor to a round or square tube leg? Matching tube adaptors are also available. Choose the size that fits the inside of your tube and buy it together with your castors.
Frequently Asked Questions
How much weight can it carry?
Each castor is rated at 150kg. A set of four is best used for loads up to around 450kg, allowing for uneven floors.
How is it fitted?
It has a single 12mm bolt hole. Fit it with a matching 12mm bolt or threaded stem, or use a matching tube adaptor to fit it into a round or square tube leg.
What is the wheel made of?
The wheel has a red polyurethane tread on a nylon centre, with a D60 tread hardness.
What temperatures can it work in?
The castor works from -40°C to +80°C.
How tall is the castor?
The total castor height is 128mm and it needs 91mm of clearance to swivel freely.
Delivery & returns
Trusted by businesses including
