Our Clients
- Load per castor700kg per castor *
- Wheel diameter125mm
- Overall height164mm
- WheelNylon
- Secure checkout
- 14-day returns on unused items
- UK-based castor advice
Specifications
- Castor Type
- Heavy Duty Swivel Top Plate Castor
- Housing
- Stainless Steel
- Wheel Diameter
- 125mm
- Wheel Material
- Nylon
- Wheel Colour
- White
- Tread Width
- 40mm
- Tread Hardness
- D75
- Bearing Type
- Plain
- Load Capacity
- 700kg per castor *
- Top Plate Size
- 140 x 110mm
- Bolt Hole Centres
- 105 x 80/75mm
- Bolt Hole Diameter
- 10mm
- Swivel Radius
- 118mm
- Total Castor Height
- 164mm
- Temperature Range
- -40°C to +80°C
Will it fit?
- Bolt hole105 x 80/75mm
- Overall height164mm
- Swivel radius118mm
Replacing an old castor? Measure between the centres of two fixing holes along the long edge, then across the short edge, and compare with the hole centres above. Allow the swivel radius as clear space around each castor so it can turn freely.
Load check
How we work it out: on a real floor one castor is often carrying little or nothing, so we share the weight across one fewer castor than you fit (with 3 castors, across all 3). Tick the box to add a 30% margin for rough use.
Floors & use
Nylon / polypropylene wheel · working temperature -40°C to +80°C
- Very easy to push, even when loaded
- Resists water, oil and many chemicals
- Hard-wearing and easy to wipe clean
- Best on smooth concrete and hard floors
- Noisier than rubber or polyurethane
- Hard tread can mark or damage soft and delicate floors
- Rolls poorly over debris and cables
Details & FAQs
Heavy Duty Stainless Steel Swivel Castor
This 125mm heavy duty stainless steel swivel castor runs on a white nylon wheel, carrying up to 700kg per castor. It is made for food manufacturing equipment, cold storage facilities and heavy-duty industrial trolleys.
The plain bearing allows smooth rotation and the swivel makes heavy loads easy to manoeuvre. The 140 x 110mm top plate with four 10mm holes gives a secure fit to flat surfaces. It works from -40°C to +80°C, so it suits both cold and warm conditions.
Why Choose This Castor
- ✓ 700kg load capacity per castor
- ✓ Heavy duty stainless steel construction
- ✓ White nylon wheel with a D75 tread
- ✓ Plain bearing for smooth rotation
- ✓ Wide -40°C to +80°C temperature range
- ✓ 140 x 110mm top plate with four 10mm holes
* Load capacity is per castor. For a set of four, allow for uneven floors by planning on three castors carrying the load.
Where It Works Best
- ✓ Food manufacturing equipment where hygiene and load capacity are critical
- ✓ Cold storage facilities and low-temperature settings
- ✓ Heavy-duty industrial trolleys
Need a different size? See our heavy duty stainless steel castor range.
Frequently Asked Questions
How much weight can it carry?
Each castor is rated at 700kg. A set of four is best used for loads up to around 2100kg, allowing for uneven floors.
What is the wheel made of?
The wheel is white nylon with a D75 tread hardness and a 40mm tread width.
What type of bearing does it use?
It uses a plain bearing, which allows smooth rotation.
How is it fitted?
The 140 x 110mm top plate has four 10mm holes, with centres of 105mm in length and 80/75mm in width. Bolt it flat to the underside of your trolley or equipment.
How much room does it need?
The total castor height is 164mm and the swivel radius is 118mm, so allow that clearance when it turns.
What temperatures can it be used in?
The castor is suited to temperatures from -40°C to +80°C, so it can be used in both cold and warm conditions.
Delivery & returns
Trusted by businesses including
