Our Clients
- Load per castor400kg per castor *
- Wheel diameter200mm
- Overall height240mm
- WheelElectrically Conductive Polyurethane
- Secure checkout
- 14-day returns on unused items
- UK-based castor advice
Specifications
- Castor Type
- Braked Swivel Top Plate Castor
- Housing
- Stainless Steel
- Wheel Diameter
- 200mm
- Wheel Material
- Electrically Conductive Polyurethane
- Wheel Colour
- Grey
- Tread Width
- 50mm
- Tread Hardness
- 95 Shore A
- Bearing Type
- Ball Bearing
- Load Capacity
- 400kg per castor *
- Top Plate Size
- 140 x 110mm
- Bolt Hole Centres
- 105 x 80/75mm
- Bolt Hole Diameter
- 10mm
- Swivel Radius
- 155mm
- Total Castor Height
- 240mm
- Temperature Range
- -40°C to +80°C
Will it fit?
- Bolt hole105 x 80/75mm
- Overall height240mm
- Swivel radius155mm
Replacing an old castor? Measure between the centres of two fixing holes along the long edge, then across the short edge, and compare with the hole centres above. Allow the swivel radius as clear space around each castor so it can turn freely.
Load check
How we work it out: on a real floor one castor is often carrying little or nothing, so we share the weight across one fewer castor than you fit (with 3 castors, across all 3). Tick the box to add a 30% margin for rough use.
Floors & use
Polyurethane tread · working temperature -40°C to +80°C
- Rolls quietly and smoothly
- Kind to most finished floors
- Hard-wearing, carries a high load for its size
- Ideal on concrete, epoxy, vinyl and tiles
- Not intended for very hot areas
- Less cushioning than rubber over rough ground
Details & FAQs
Stainless Steel Electro Conductive Castor
This large 200mm stainless steel braked swivel castor runs on a grey electrically conductive polyurethane wheel that helps carry static electricity away to the floor, carrying up to 400kg per castor. It is made for electronics manufacturing, laboratory equipment and medical facilities where heavier equipment needs static control and a secure brake.
The foot-operated brake holds your equipment in place, while the ball journal bearing gives smooth swivelling and easy rolling. The wide 50mm, 95 Shore A tread spreads the load on smooth hard floors, and the 140 x 110mm stainless top plate with four 10mm holes bolts securely under heavy trolleys and equipment.
Why Choose This Castor
- ✓ Electrically conductive wheel to help prevent static build-up
- ✓ Brake to hold equipment in place
- ✓ 400kg load capacity per castor
- ✓ Large 200mm wheel with a wide 50mm tread
- ✓ Ball journal bearing for smooth, easy movement
- ✓ 140 x 110mm top plate with dual hole centres
* Load capacity is per castor. For a set of four, allow for uneven floors by planning on three castors carrying the load.
Where It Works Best
- ✓ Electronics manufacturing where static discharge must be controlled
- ✓ Laboratory trolleys and carts that need precise movement and braking
- ✓ Medical equipment needing reliable mobility and static protection
Frequently Asked Questions
What does the brake lock?
The brake stops the wheel from rolling so your trolley or equipment stays in place. Press the pedal down to lock and lift it to release.
How does the conductive wheel help?
The electrically conductive polyurethane lets static electricity pass from your equipment to the floor, which helps stop static from building up.
How much weight can it carry?
Each castor is rated at 400kg. A set of four is best used for loads up to around 1200kg, allowing for uneven floors.
How is it fitted?
The 140 x 110mm top plate has four 10mm holes on 105 x 80/75mm centres, so M10 bolts with nuts and washers are the right fit.
How tall is the castor?
The total castor height is 240mm and it needs 155mm of clearance to swivel freely.
Delivery & returns
Trusted by businesses including
