Our Clients
- Load per castor80kg per castor *
- Wheel diameter100mm
- Overall height134mm
- WheelElectrically Conductive Rubber
- Secure checkout
- 14-day returns on unused items
- UK-based castor advice
Specifications
- Castor Type
- Braked Swivel Top Plate Castor
- Housing
- Stainless Steel
- Wheel Diameter
- 100mm
- Wheel Material
- Electrically Conductive Rubber
- Wheel Colour
- Grey
- Tread Width
- 30mm
- Tread Hardness
- A85
- Bearing Type
- Roller Bearing
- Load Capacity
- 80kg per castor *
- Top Plate Size
- 95 x 70mm
- Bolt Hole Centres
- 76/70 x 50/44.5mm
- Bolt Hole Diameter
- 8mm
- Swivel Radius
- 106mm
- Total Castor Height
- 134mm
- Temperature Range
- -20°C to +60°C
Will it fit?
- Bolt hole76/70 x 50/44.5mm
- Overall height134mm
- Swivel radius106mm
Replacing an old castor? Measure between the centres of two fixing holes along the long edge, then across the short edge, and compare with the hole centres above. Allow the swivel radius as clear space around each castor so it can turn freely.
Load check
How we work it out: on a real floor one castor is often carrying little or nothing, so we share the weight across one fewer castor than you fit (with 3 castors, across all 3). Tick the box to add a 30% margin for rough use.
Floors & use
Rubber tread · working temperature -20°C to +60°C
- Cushions the load and soaks up vibration
- Quiet on most surfaces
- Copes with uneven floors, thresholds and outdoor use
- Good grip on smooth floors
- Takes more effort to push than nylon under heavy loads
- Oils and solvents shorten tyre life
Details & FAQs
Stainless Steel Anti-Static Castor
This 100mm stainless steel braked swivel castor runs on a grey electrically conductive rubber wheel that helps carry static electricity away to the floor, carrying up to 80kg per castor. It is made for hospital beds, medical trolleys and laboratory carts where static build-up needs to be controlled.
The brake acts on both the wheel and the swivel head, holding your equipment firmly in place when needed. The A85 rubber tread gives a good balance of grip and long wear, the roller bearing keeps rolling smooth, and the 95 x 70mm stainless top plate with four 8mm holes bolts neatly to the underside of your equipment.
Why Choose This Castor
- ✓ Electrically conductive rubber wheel to help prevent static build-up
- ✓ Brake locks both the wheel and the swivel head
- ✓ Stainless steel body for clean and damp areas
- ✓ A85 grey rubber tread for grip and quiet rolling
- ✓ 80kg load capacity per castor
- ✓ 95 x 70mm top plate with dual hole centres
* Load capacity is per castor. For a set of four, allow for uneven floors by planning on three castors carrying the load.
Where It Works Best
- ✓ Hospital beds and medical trolleys where static must be controlled
- ✓ Laboratory carts where static discharge must be managed
- ✓ Healthcare trolleys carrying sensitive electronic equipment
Frequently Asked Questions
What does the brake lock?
The brake acts on both the wheel and the swivel head, so the castor can neither roll nor turn while the brake is on.
How does the conductive wheel help?
The electrically conductive rubber lets static electricity pass from your equipment to the floor, which helps stop static from building up.
How much weight can it carry?
Each castor is rated at 80kg. A set of four is best used for loads up to around 240kg, allowing for uneven floors.
How is it fitted?
The 95 x 70mm top plate has four 8mm holes with dual centres of 76/70 x 50/44.5mm, so it suits more than one hole pattern. Bolt it flat to the underside of your equipment.
How tall is the castor?
The total castor height is 134mm and it needs 106mm of clearance to swivel freely.
Delivery & returns
Trusted by businesses including
