Our Clients
- Load per castor150kg per castor *
- Wheel diameter80mm
- Overall height108mm
- WheelPolyurethane on Nylon
- Secure checkout
- 14-day returns on unused items
- UK-based castor advice
Specifications
- Castor Type
- Braked Swivel Bolt Hole Castor
- Housing
- Stainless Steel
- Wheel Diameter
- 80mm
- Wheel Material
- Polyurethane on Nylon
- Wheel Colour
- Grey
- Tread Width
- 38mm
- Hardness of Tread
- D60
- Bearing Type
- Roller Bearing
- Load Capacity
- 150kg per castor *
- Fixing
- Single Bolt Hole
- Bolt Hole Size
- 12mm
- Swivel Radius
- 120mm
- Total Castor Height
- 108mm
- Temperature Range
- -40°C to +80°C
Will it fit?
- Bolt hole12mm
- Overall height108mm
- Swivel radius120mm
Replacing an old castor? Measure between the centres of two fixing holes along the long edge, then across the short edge, and compare with the hole centres above. Allow the swivel radius as clear space around each castor so it can turn freely.
Load check
How we work it out: on a real floor one castor is often carrying little or nothing, so we share the weight across one fewer castor than you fit (with 3 castors, across all 3). Tick the box to add a 30% margin for rough use.
Floors & use
Polyurethane tread · working temperature -40°C to +80°C
- Rolls quietly and smoothly
- Kind to most finished floors
- Hard-wearing, carries a high load for its size
- Ideal on concrete, epoxy, vinyl and tiles
- Not intended for very hot areas
- Less cushioning than rubber over rough ground
Details & FAQs
Stainless Steel Braked Bolt Hole Castor
This 80mm stainless steel braked swivel castor runs on a heavy-duty grey polyurethane on nylon wheel and carries up to 150kg per castor. It is ideal for food manufacturing environments, processing trolleys and industrial carts, and the brake allows secure positioning.
The polyurethane on nylon construction gives a balance of strength and resilience on smooth, hard floors, and the D60 tread offers firm surface contact. A roller bearing gives smooth rotation. It works from -40°C to +80°C, and a single 12mm bolt hole fits into the end of a tube leg or onto a threaded fixing.
Why Choose This Castor
- ✓ Brake for secure positioning
- ✓ Stainless steel housing for food manufacturing environments
- ✓ Grey polyurethane tread on a nylon centre
- ✓ D60 tread for smooth, hard floors
- ✓ Roller bearing for smooth rotation
- ✓ 150kg load capacity per castor
- ✓ Single 12mm bolt hole for tube legs and threaded fixings
* Load capacity is per castor. For a set of four, allow for uneven floors by planning on three castors carrying the load.
Where It Works Best
- ✓ Food manufacturing equipment where hygiene and material resilience are crucial
- ✓ Processing trolleys that need smooth and controlled movement
- ✓ Industrial carts that need reliable load handling and mobility
Tube Adaptors Also Available
Fitting this castor to a round or square tube leg? Matching tube adaptors are also available. Choose the size that fits the inside of your tube and buy it together with your castors.
Frequently Asked Questions
What does the brake do?
It allows secure positioning when the equipment needs to stay in place.
How much weight can it carry?
Each castor is rated at 150kg. A set of four is best used for loads up to around 450kg, allowing for uneven floors.
How is it fitted?
It has a single 12mm bolt hole. Fit it with a matching 12mm bolt or threaded stem, or use a matching tube adaptor to fit it into a round or square tube leg.
What temperatures can it work in?
The castor works from -40°C to +80°C.
How tall is the castor?
The total castor height is 108mm and it needs 120mm of clearance to swivel freely.
Delivery & returns
Trusted by businesses including
