Our Clients
- Load per castor90kg per castor (270kg for a set of 4) *
- Wheel diameter65mm
- Overall height75mm
- WheelRubber on Polypropylene
- Secure checkout
- 14-day returns on unused items
- UK-based castor advice
Specifications
- Castor Type
- Braked Twin Wheel Threaded Stem Castor
- Fixing
- M8 x 15mm Threaded Stem
- Wheel Diameter
- 65mm
- Wheel Material
- Rubber on Polypropylene
- Wheel Colour
- White with dark grey tyre
- Bearing Type
- Plain
- Brake
- Integrated Wheel Lock
- Swivel Radius
- 51mm
- Total Castor Height
- 75mm
- Load Capacity
- 90kg per castor (270kg for a set of 4) *
Load check
How we work it out: on a real floor one castor is often carrying little or nothing, so we share the weight across one fewer castor than you fit (with 3 castors, across all 3). Tick the box to add a 30% margin for rough use.
Floors & use
Rubber tread
- Cushions the load and soaks up vibration
- Quiet on most surfaces
- Copes with uneven floors, thresholds and outdoor use
- Good grip on smooth floors
- Takes more effort to push than nylon under heavy loads
- Oils and solvents shorten tyre life
Details & FAQs
Braked Drip Stand Castor
This 65mm braked twin wheel castor has a pearl-white body, dark grey rubber tyres and a brake that locks the wheels, rated at 90kg per castor. It gives drip stands, equipment trolleys and mobile bases quiet, controlled movement and holds them firmly once they are in position.
The castor fixes with a short M8 x 15mm threaded stem that screws into a matching insert or socket. The rubber on polypropylene wheels roll gently and help protect wood, laminate, tile and low-pile carpet, and the twin wheel design spreads the load for better stability than a single wheel.
Why Choose This Castor
- ✓ Brake locks the wheels for secure positioning
- ✓ 90kg load capacity per castor
- ✓ Quiet rubber tyres that help protect floors
- ✓ Twin wheels for better stability and weight spread
- ✓ Short M8 x 15mm threaded stem for a secure fit
- ✓ Clean modern pearl-white finish
* Load capacity per castor. For a set of four, allow for uneven floors by planning on three castors carrying the load. Check that your fitting takes an M8 x 15mm stem before ordering.
Where It Works Best
- ✓ Drip stands and medical trolleys: stands that must stay put during use.
- ✓ Mobile equipment bases: bases that need a floor lock.
- ✓ Utility and service units: units moved around and then locked.
- ✓ Cabinets and fixtures: cabinets and portable fixtures on indoor floors.
Frequently Asked Questions
What does the brake do?
Press the brake pedal down to lock the wheels so the stand or unit cannot roll. Lift the pedal to release it and move again.
How do I fit this castor?
Screw the M8 x 15mm stem into a matching M8 threaded insert or socket and tighten the nut against the leg.
Will it fit my drip stand?
It fits any stand or base with an M8 threaded socket. Check the stem on your old castor before ordering.
Is it good for hard floors?
Yes. The rubber tyres roll quietly and help protect wood, laminate, tile and vinyl floors. It also works on low-pile carpet.
How much weight can it carry?
Each castor is rated at 90kg, and a set of four up to 270kg.
How tall is the castor?
The total castor height is 75mm, with 65mm wheels and a 51mm swivel radius.
Delivery & returns
Trusted by businesses including
